AN Easy to install and lighter alternative for underfloor structures.
Scyon Secura Interior flooring is a time-saving, structural substrate for wet and dry area tile, vinyl and carpet finishes over timber or light-weight steel joists.
Secura interior flooring is 15% lighter per square metre than conventional 15mm compressed fibre cement (CFC). With no need for pre-drilling, it can be gun nailed, making it up to 40% faster to install than compressed fibre cement. Secura flooring can be nailed in place with 50 x 2.8mm nails or 50mm D-hand gun nails, both corrosion-resistant of course.
There's a moisture-resistant sealer on all sides to protect the boards from rain during construction. The sealer combined, with the water resistant properties of Scyon, eliminates the need for full floor waterpoofing outside enclosed shower areas.
For dry area floors, tiles and vinyl can be directly fixed to Secura Interior Flooring without the need for the underlay sheet required by some timber products.
The Secura Interior Floor boards have one side which suits vinyl and the other which suits tiles. The vinyl side has square edges along all 4 board edges. The tile side has a slight bevel along the tongue and groove (long) edges which are designed to hold joint sealant and help create a sealed joint. The boards are printed to indicate which side is which (This side DOWN for TILES and this side UP for VINYL).
Clever features of Scyon Secura Interior Flooring.
- Tongue and groove assembly eliminates the need for timber trimmers along the joint.
- Resistant to termites, fire and damage from moisture.
- It's made from Scyon.
Installing Scyon Secura Interior Flooring.
If it rains during constuction, a timber substrate floor can warp and may need to be replaced or sanded to restore a smooth and even surface. Secura on the other hand, resists damage from moisture.
Secura Interior board sizes:
2700x600x19mm (code 404173) - for 450mm joist centres, white edge colour, mass 24.5 kg/m2.
1800x900x19mm (code 403550) - for 450mm joist centres, white edge colour, mass 24.5 kg/m2.
2400x600x22mm (code 404691) - for 600mm joist centres, dark grey edge colour, mass 28.3 kg/m2.